Remote Access Via Vnc; Preparing The Computer; Preparing The Printer; Establishing A Connection - QuickLabel QL-60 User Manual

21
Note: For the remote access via VNC the firmware version 5.03 or later must be installed.
VNC is software that allows remote control of a printer's operation control panel (server) via a
computer (client) through input devices like keyboard and mouse.
VNC is not platform dependent and enables the use of a Windows computer as well as a mobile
Android or iOS system as an external remote control. The prerequisite for this is the installation
of a VNC client on the system used.

Preparing the Computer

1) Install the VNC client on the computer.

Preparing the Printer

1) Activate the VNC server under Setup > Interfaces > Network services > VNC server.
2) Enter password vnc under Security > Password VNC.
For Wireless Access:
1) Activate WLAN under Setup > Interfaces > WLAN > WLAN.
2) Find out the WLAN-IP-Address under Info.
For Ethernet Access:
1) Find out the Ethernet-IP-Address under Info.

Establishing a Connection

1) Start the VNC client on the computer.
2) Enter the IP address and password vnc in the configuration of the VNC client.
3) Activate the connection.
QL-30/60 User Guide
The menu of the printer will be visible and usable via mouse click, keyboard or touch-pad
just like on the printer itself.

Remote Access via VNC

149