Table of Contents
Advertisement
•
•
Attention: Do not change the settings of the "IP" and "Gateway" on the printer web interface,
as otherwise the connection to the printer may be lost.
Setting Up a WLAN Connection
1) Start menu.
2) Select Setup > Interfaces > WLAN.
3) Activate WLAN.
4) Select Access-Point.
5) Select an access point and confirm.
6) For hidden access-points enter the SSID.
7) Setup DHCP or IP and Mask and if necessary Gateway.
8) If the network is protected a prompt to enter the passkey appears in the printer display.
9) Set up print service if necessary.
10) Adjust Windows printer setting.
Attention: Do not change the settings of the "IP" and "Gateway" on the printer web interface,
as otherwise the connection to the printer may be lost.
Connecting Label Printer via USB Interface
The full-speed USB interface allows the label printer to be operated via a USB interface of a
computer running one of the 32bit or 64bit operating systems:
•
•
•
•
•
•
QL-30/60 User Guide
Set up print service if necessary.
Windows" on page 70.
Adjust Windows printer setting.
See "Interfaces" on page 87.
The search for access-points will be started. The display shows the available access-points
including the hidden access-points.
Enter the passkey and select:
Windows" on page 70.
Windows Vista
Windows 7
Windows 8
Windows 8.1
Windows 10
Windows Server 2003
Connecting Label Printer to Computer
See "Print Services Raw-IP and LPR/LPD in MS
See "Adjusting Windows Printer Setting" on page 70.
See "Print Services Raw-IP and LPR/LPD in MS
See "Adjusting Windows Printer Setting" on page 70.
See "Interfaces" on page 87.
71
Advertisement
Table of Contents
