Labels - QuickLabel QL-60 User Manual

Configuration
Table 20: Parameters of the Setup > Printing menu (Continued)

Labels

•
•
Table 21: Parameters of the Setup > Labels menu
82
Icon Parameter
Reprint
Start menu.
Select Setup > Labels.
Icon Parameter
Label sensor
Meaning
Printing of another label with the
information of the previous print job by
touching
This function can be executed until the
print buffer is cleared with
• Re-render: Adaption of counter
values, variable data can be newly put
in.
• Duplicate: New label is identical with
the last label of the print job.
• Off: No reprint
Meaning
Method for detecting the starting end of
the label.
• Gap Sensor: Detection using changes
in the transparency between the label
and label gap.
• Bottom-Reflect: Detection using
reflective marks on the bottom of the
medium.
• Continuous media: Checking the
existence of media only.
Default
Re-render
Default
Gap sensor
QL-30/60 User Guide