QuickLabel QL-60 User Manual page 128

I/O Interface
Table 45: Pin assignment of the I/O interface (Continued)
Pin
9
10
11
12
13
14
15
16
17
128
Signal Name
JOBRDY
Bit 1
READY
Bit 2
- -
REPRINT
START
PAUSE
RIBWARN
LBLREM
JOBDEL
Description
Print job ready
Print jobs are stored in the
print module.
User Bit 1 is set
Printer is ready
User Bit 2 is set
Do not use
The last printed label will be
repeated.
Print start signal
only for Print on demand =
On
Pause ON/OFF
Warning end of ribbon
The ribbon supply roll
diameter has undershot a
predefined level
Label removed
For peel-off mode only.
Confirmation of the superior
control that the label has
been taken from the peel-off
position.
Required for the validity of a
new start signal.
Cancel print job
The current print job is
canceled and deleted from
the print buffer.
Activation / Active
State
+24 V on Pin 9
+24 V on Pin 10
+24 V between Pin
12 and Pin 25
+24 V between Pin
13 and Pin 25
Pause ON when +24
V between Pin 14
and Pin 25
0 V on Pin 15
Switch on +24 V
between Pin 16 and
Pin 25
Switch on +24 V
between Pin 17 and
Pin 25
QL-30/60 User Guide