Cutting on Demand with Cutter CU400
In the standard cut mode all labels of a print job will be printed and cut one after another without
interruption. Using the I/O interface the print job can be split into single steps with printing and
cutting each one label.
Requirements:
•
•
•
Operation:
1) Send a print job.
2) Activate START.
QL-30/60 User Guide
Operation with Cutter CU400.
External circuit as shown in Figure 57 / Figure 58
Setting Printing > Print on Demand = "On".
The first label will be printed and cut.
I/O Interface
139