Table of Contents
Advertisement
4) Select Diagnostics > Label profile.
5) Insert printable medium (labels, continuous media) which extends across the entire printing
6) If the printout is to occur using thermal transfer printing, insert transfer ribbon with the
7) Start the diagram printout with Continue.
The printout can be canceled with the following icon:
Figure 40: Label profile
QL-30/60 User Guide
The printer performs a longer label advance. The label sensor measures the
transparency/reflection capacity of the label material here. The message Insert appears in
the display once the advance is complete.
width.
maximum width.
Diagnostic Functions
113
Advertisement
Table of Contents
