Table of Contents
Advertisement
Test Functions
The printout can be canceled with the following icon:
Figure 33: Status print
Parameters marked italic are only printed when the printer is equipped with the respective
optional assembly or when the service key is inserted
Font list
The Font list function prints the most important parameters of the fonts available in the printer
in tabular form. The table contains both the original fonts in the printer and other fonts loaded
into the printer. The printout occurs using the heat level and print speed specified in the Setup
> Printing menu.
Note: The printout occurs without taking the label gaps into consideration. This is why
continuous media is most suitable for this purpose.
1) Insert printable medium (labels, continuous media) which extends across the entire printing
2) If the printout is to occur using thermal transfer printing, insert transfer ribbon with the
3) Start menu.
4) Select Test > Font list.
104
width.
maximum width.
QL-30/60 User Guide
Advertisement
Table of Contents
