Veichi Electric AC60 series Manual page 75

Tips: The main frequency given channel and the auxiliary frequency given
channel can be set as the same channel. In such circumstances, the
corresponding relationships between the frequency setting values and input
signal are rather special, so it needs to take consider of the both
characteristic. The main frequency given channel and the auxiliary frequency
after Synthesizing are still limited by the upper limit frequency and lower
frequency.
E-04 Frequency given channel
gain
E-05 Frequency given channel
combination
Frequency given channel gain is used to amplify or shrink the frequency input
channel signal, to adjust the frequency value of the main channel and that of
the auxiliary channel by proportion.
Frequency given channel combination are used to select the constitution method
of main frequency input channel and auxiliary channel of the frequency inverter.
And "K"represent［E-04］setting values.
0：main channel is valid, auxiliary channel is invalid.
1：auxiliary channel valid，main channel invalid
2：both channel non "0" value valid, main channel priority
3：main channel + （K×auxiliary channel）
4：main channel - （K×auxiliary channel）
5：MAX[main channel ,(K×auxiliary channel)]
6：MIN[main channel ,(K×auxiliary channel)]
7：auxiliary channel +(K×main channel)
8：auxiliary channel -(K×main channel)
9：MAX[(K×main channel), auxiliary channel]
10：MIN[(K×main channel), auxiliary channel]
Tips: 1,the terminal VS2 is special only in multi-channels case.
A, when no input bipolar adjustment and no direction control for terminal
VS2 ([F-48]is "0"),the combination is according to [E-05] setting.
B, when opened input bipolar adjustment and no direction control for
range：0.01～5.00
range：0 ～ 10
71
Factory
setting：1.00
Factory
setting：0