Veichi Electric AC60 series Manual page 79

E-15 Acceleration、
Deceleration mode
Acceleration time is the time consumed while the output frequency accelerate
from 0.00Hz to the maximum frequency.
Deceleration time is the time consumed while the output frequency decelerate
from the maximum frequency to 0.00Hz.
Without annotate circumstances, usually take the acceleration and
deceleration time 1 as the default acceleration and deceleration time.
Acceleration time is only valid for normal speed up, barring start DC braking
time and start-up frequency duration; Deceleration time is only valid for the
normal speed down, barring stop DC braking time;
If you choose other acceleration 、 deceleration time group, you must
choose through the control terminal. When in the program running , it is defined
as the first type of acceleration 、 deceleration time. Please refer to ［F-24～
F-29］ for another three type;
Jog acceleration/deceleration time is set by ［E-26、E-27］.
Acceleration 、 deceleration mode
two kinds of acceleration 、 deceleration mode that both are valid in the normal
range：0，1
This series frequency inverter provide
75
setting：※
Factory
setting：0