After Electrification; Operation - Veichi Electric AC60 series Manual

1. Please make sure that voltage grade of power supply is consistent with
frequency inverter's voltage and then check whether the wiring is correct
and firm, and whether there is short circuit in peripheral equipment's
circuit. Otherwise it will damage frequency inverter and other
equipments.
2. Before the frequency inverter is connected to the input power supply,
make sure that the cover has been fixed well. Otherwise it will cause
electric shock.
3. For the frequency inverters whose storage time is over 1 year, when
electrification, the voltage should be raised by booster from low to
high. Otherwise it will damage the frequency inverter.
1. Check all periphery fittings are wired properly according to the
handbook; Otherwise it will cause accidents.
● After electrification
1. After electrified, it is forbidden to open the cover, make wiring, and
check up; Otherwise, it will cause the danger of electric shock.
2.After electrified, it is forbidden to contact internal wiring board and
its parts. Otherwise it will cause the danger of electric shock.
3.Do not operate or touch frequency inverter with wet hand. Otherwise there
is dangers of damage to frequency inverter and electric shock.
1. Pleasea set the parameter of frequency inverter cautiously; Otherwise
it will damage equipment.
●Operation
Attention
Danger
Attention
Danger
4