Veichi Electric AC60 series Manual page 73

OFF ON
OFF ON
OFF
ON
ON OFF
ON OFF
ON OFF
Tips: Valid frequency selection terminals combinations are 0 to 11 (10
digits). If not in this range, frequency inverter output 0 frequency;
"OFF" in the table said corresponding terminal and (COM) disconnected.
"ON" said corresponding terminal and (COM) short connect.
E-03 Frequency given
auxiliary channel
selection
［E-03］is use to select the auxiliary input channels of the give frequency.
If you need more details about the combination method of the auxiliary
channel and the main channel, please refer to [E-05].
0：Keyboard number given
determined and amended by the Up/down key on the keyboard or parameters
［E-16］
1 Keyboard potentiometer
determined and amended by the potentiometer on the keyboard.
2：Terminal VS1 voltage 0～10V
channel is determined and amended by the control panel analog quantity
input terminal （VS1）.
3:Terminal AS current 4 ～ 20mA
channel is determined and amended by the control panel analog quantity
ON
OFF
ON
ON
OFF
OFF
OFF
ON
ON
OFF
ON
ON
range：0 ～ 10
The given frequency of the auxiliary channel is
The given frequency of the auxiliary channel is
The given frequency of the auxiliary
The given frequency of the auxiliary
69
RS485 communication
port
ascend 、descend
control
Normal PID operation
constant pressure
control
Program run
swing frequency
operation
Factory
setting：0