Veichi Electric AC60 series Manual page 76

terminal VS2 ([F-48]is "1"), polarity frequency gived by (VS2) and
frequency gived by another channel carry out symbol calculate based on
the combination method selected. After calculation, the absolute value
is frequency value and the symbol decides the motor direction.
C, When VS2
control([F-48]is "2"), polarity frequency gived by (VS2) and
frequency gived by another channel carry out symbol calculate based on
the combination method selected. After calculation, the absolute value
is frequency value, and [E-01] decides the motor direction.
2, while swing frequency operation, jog or multi-steps speed operation,
auxiliary channel can not be conbined.
Upper LED
E-06
selection:
Lower LED
E-07
selection：
Apart used to choose the monitoring items displayed in two LED on the keyboard.
In the monitoring state, the upper LED monitoring item and the lower monitoring
item can also be directly modified through the SET key and OFFSET key .
0：given frequency
2：input current
4：output voltage
6：PID given quantitative
When there is only one LED on the keyboard, it is invalid to modify the lower
LED monitoring function by the ［E-07］and offset key.
E-08 Keyboard REV/JOG key
function selection
Used to select the keyboard keys REV / JOG functions.
opened bipolar adjustment
display
Range ：0～7
display
Range ：0～7
1：output frequency
3：input voltage
5：mechanical speed
7：PID feedback quantitative
Range ：0，1
72
without direction
Factory
setting ：0
Factory
setting ：1
Factory
setting ：0