In three linear control operation, "SB1"is stop button which is usually
connected, "SB2" is running button which is usually disconnected, both
"SB1"and "SB2"are valid at pulse edges; "K" is the operation direction
selection button; "D (X)" is
defined as the terminals of the three-linears operational control (11)
function.
F-09
1 step speed
setting 1X
F-10
2 step speed
setting 2X
the multi-function terminal; (X1 - X6) are
Range :0.00Hz~upper limit
frequency
Range :0.00Hz~upper limit
frequency
110
Factory
setting: 20.00Hz
Factory
setting:10.0Hz