Veichi Electric AC60 series Manual page 40

Press to modify parameter while in menu interface.Press
again to confirm aftr modify. While standby or
Confirm/modifykey
running, press to change LED monitoring items at
stop
Select parameter group in menu interface. Modify
parameter while in modify interface. Modify given
Up/down key
frequency or PID or given torque while at standby or
monitoring state（While given frequency or PID or
given torque are set by keyboard）
Select digit of function no modified by up/down key；
Shift key
Select parameter digits modified by up/dowm key.
Change LED monitoring items while standby or running
While run/stop is controlled by keyboard, press this key,
Forward key
the inverter forward rotate.
While run/stop is controlled by keyboard, press it,
Jog/Reverse key
machine will reverse if this key is defined as REVERSE
and machine will jog if this key is defined as JOG.
Machine stops if press it while run/stop is controlled by
keyboard. Its efficiency range is defined via function no
Stop/Reset key
F-07. Inverter reset if press it in fault state(no reset if
fault is not solved)
Can be used as input channel for given frequency, upper
Potentionmeter
frequency limit, gived torque, given PID or PID
key
feedback setting.
36