Veichi Electric VC-eNET User Manual

VC-eNET User Manual
Thank you for purchasing the VC-eNET developed and produced by Suzhou VEICHI Electric Technology Co., Ltd. Before using our company's VC
series PLC products, please read this manual carefully, so as to better grasp the characteristics of the products and correctly install and use them. More
secure application and make full use of the rich functions of this product.
Tips:
Please read the operating instructions, precautions and cautions carefully before starting to use the product in order to reduce the risk of accidents.
Personnel responsible for the installation and operation of the product must be strictly trained to comply with the safety codes of the relevant industry,
strictly observe the relevant equipment precautions and special safety instructions provided in this manual, and carry out all operations of the equipment
in accordance with the correct operating methods.
1 Interface description
1.1 Interface description
The appearance of VC-eNET interface and user terminal is shown in Figure 1-1.
Figure 1-1 Appearance of the module interface
1.2 Access to the system
Through the expansion interface, the VC-eNET module can be connected with the VC series PLC main module. As shown in Figure 1-2
Push to the right
VC1-1614MAR
Figure 1-2 Schematic diagram of the connection between the communication module and the main module
1.3 Wiring Instructions
(1) Wire
VC-eNET mainly extends the main module of VC1 series to the left, and can provide one channel of Ethernet communication function. In order to
ensure that your communication is normal, it is recommended to use shielded network cable for network data transmission, without short circuit,
1