Start-Up Selection - Veichi Electric AC60 series Manual

Tips: in the process of frequency inverter start and speed up, when the given
frequency is lower than start-up frequency, frequency inverter output is
zero.
E-30

Start-up selection

0: Start by the start-up frequency
and [E-29] start-up frequency duration setting control frequency inverter
start; It is suitable for the situation with big static friction torque
and small load inertia, or the situation where it need to coordinate with
exterior machinery braking devices. That is occasion where the motor shaft
can maintain static before the motor restart after close down.
1: DC braking first, then start-up frequency
[E-35] and DC braking time [E-38] give the motor with load a certain DC
braking energy (namely electromagnetic brake), then start by start-up
frequency; It is suitable for the small inertial load occasion with forward
rotating or reversing phenomenon in the stop state.
Range ：0～2
[E-28] the start-up frequency setting
Firstly, DC braking voltage
83
Factory
setting：0