Veichi Electric AC60 series Manual page 154

H-69 Baud rate
0：1200bps
1：2400bps
2：4800bps
3：9600bps
4：19200bps
H-70 Communication setting
frequency ratio
The frequency instruction which is send out by superordinate machine
multiplies this parameter; The result is this machine's setting frequency.
Frequency instruction
proportionally.
H-71 Communication
overtime time
If the gap time between a communication and the next communication exceeds
communication overtime time, it is considered there is communication
disconnection fault , malfunction disconnection action mode is decided by the
［H-72］.
H-72 RS485 communication
disconnection action mode
0：Close down
1：Maintain original state
Range ：0 ～ 4
range：0.01～5.00
of superordination
Range ： 0.0 ～ 6500.0
second
Range ：0，1
After the communication fault is detected,
150
Factory setting：3
Factory setting ：
1.00
machine can be revised
Factory setting：
10.0 second
Factory
setting：0