Veichi Electric AC60 series Manual page 119

5 Running
6 Reversal running
Inverter
7
undervoltage
Overload
8
pre-alarming
Output frequency
9 reach upper limit
frequency
Output frequency
10 reach lower limit
frequency
11 Exterior fault stop
12 Timer times up
Counter reach
13
maximum values
frequency of frequency inverter is lower
than the frequency detection level, it
outputs invalid signal after ［F-35］ delay
time setting.
When frequency inverter is in the running
state, it outputs signal.
When frequency inverter reverse，it outputs
signal.
When the frequency inverter displays "LU"
for the voltage is too low,it outputs signal.
When the output current of frequency inverter
reach［F-36］and［F-37］setting values，it
outputs signal.
When frequency inverter run to the upper
frequency limit, it outputs signal.
When frequency inverter run to the lower
frequency limit,it outputs signal.
When the exterior fault input signal of
frequency inverter
frequency inverter stoppes, this terminal
outputs valid signal.
When reaching the setting time of frequency
build-in timer , this terminal output a 500ms
wide valid pulse signal.
When the counter reaching the maximum values,
output terminal output a valid signal with
width equal to exterior clock period. And the
115
is valid, and the