Basic Parameter; Chapter Six Functional Parameter Table - Veichi Electric AC60 series Manual

Chapter six Functional Parameter Table

"●" ：Means that the parameter can be revised during frequency inverter in
a running state;
"〇" ：Means that the parameter can not be revised during frequency inverter
in a running state;
"×" ：Means that the parameters can only be read and can not be changed;
"–" ：Means that the parameter is only set by the manufacturer.
"※" ：Means that the parameter is related to the type of the frequency inverter

6.1 Basic parameter

Function
NO
description
Run command given
E-01
channel selection
Frequency given
E-02 main channel
selection
Range of settings and
definition
0：Keyboard control
1：Terminal control
2：RS485communication
port control
0： Keyboard number setting
1：Keyboard potentiometer
2:Terminal VS1 voltage
signal，0～10V
3:Terminal AS current
signal，4～20mA
4 :Terminal VS2 voltage
signal-10～10V
5：Terminal pulse signal
6:RS485 communication
port
7： Ascend、 descent control
8：Normal PID running
9 ： Constant voltage PID
control
10：Program running
11：Swing frequency
43
64
0 〇 101H
1 〇 65 102H