Veichi Electric AC60 series Manual page 127

Tip : When (VS2) is used as PID given or feedback channel, the function of
bipolar is invalid. At this moment, the usage of (VS2) terminal is the same
with the (VS1) terminal. Namely, when (VS2) <0, frequency inverter think the
input of this port is 0.
AS terminal input
F-50
current lower limit
AS terminal input
F-51
current upper limit
AS terminal input
F-52
current gain
AS terminal input current lower limit
signal which received by the analog input terminal（AS） ，frequency inverter
will automatically filters the current signal whose value is lower than this
value; For example, if the factory setting of this value "4.00" ， 4.00～20.00mA
input current can realize.
Range ：0.00mA～［F-51］
Range ： ［F-50］ ～20.00mA
Range ：0.01～5.00
This function defines the minimum
123
Factory setting：
4.00mA
Factory setting：
20.00mA
Factory setting：
1.00