Veichi Electric AC60 series Manual page 74

input terminal （AS）.
4： Terminal VS2 voltage -10～10V
channel is determined and amended by the control panel analog quantity
input terminal （VS2）.
5：Terminal pulse signal
is determined and amended by the control panel signal input terminal
（PUL）
6：RS485 communication port
is control by the signal which is received through the RS485 communication
port（A+）and（B-）.
7：Ascend 、descend control
is control by the connection and disconnection between the frequency
ascending terminal UP, descending terminal DW and(COM); Any one of
multi-function terminal （X1～X6） can separately be defined as frequency
ascending terminal and descending terminal , please refer to parameter
［F-01～F-06］ for more detail；For the initial frequency mode setting
in ascend and descend control, please refer to ［F-07］LED "10"digit
options and ［F-70］.
8：Normal PID operation
normal PID closed-loop control system and parameter[H-16]setting can be
set by Up/down key on the keyboard.
9：Constant pressure PID control
constitute constant pressure PID closed-loop control system and
parameter[H-16]setting can be set by Up/down key on the keyboard.
10：Program run The given frequency of the auxiliary channel and the
travel direction of the frequency inverter is controlled by the process
of simple PLC inside the frequency inverter, maximum process control 15
sections speed; Details sees parameters [E-13 , E-14 , F-09 ~ F-29 , H-32
~ H-64].
The given frequency of the auxiliary
The given frequency of the auxiliary channel
The given frequency of the auxiliary channel
The given frequency of the auxiliary channel
If you select this channel, it can constitute
If you select this channel, it can
70