Mosaic Settings; Freeze Settings - Sony MVS-8000 User Manual

Mosaic Settings

This effect divides the image into small tiles so that it looks like a mosaic.
For an illustrative figure and other information, see "DME Special Effects" in
Chapter 1 (Volume 1).
Applying the Mosaic effect
Use the following procedure.
1
2
3

Freeze Settings

This effect freezes the input video. The following types are available:
• Hard Freeze
• Time Strobe
• Film
For details of the operation modes, see "DME Special Effects" in Chapter 1
(Volume 1).
To apply a Freeze effect, start by displaying the Freeze menu. In the DME
menu, select VF3 'Freeze' and HF1 'Freeze.'
Applying the Hard Freeze effect
Use the following procedure.
38
DME Special Effect Operations
In the DME menu, select VF2 'Video Modify' and HF4 'Mosaic.'
The Mosaic menu appears.
Press [Mosaic], turning it on.
The Mosaic effect is enabled. You can adjust the size and aspect ratio of
the mosaic tiles with the knobs.
Set the parameters.
Knob Parameter
1 Size
2 Aspect
a) Specify minus values to stretch the tiles in the vertical direction, and plus values to stretch
the tiles in the horizontal direction.
Adjustment
Size of tiles
Aspect ratio of tiles
Setting values
0.00 to 100.00
−
a)
100.00 to +100.00