Effect Status Display; Effect Register Editing - Sony MVS-8000 User Manual

5
Press [Effect Dissolve], turning it on.
6
Turn the knob to set the duration.
Knob
2

Effect Status Display

The Effect>Effect menu displays the following information.
Region name: The selected region name appears in the upper part of the list.
Register number
Register name
Write-protected status: When the register is write-protected, a letter "L"
appears.
Empty status: When the register is empty, a letter "E" appears.

Effect Register Editing

You can carry out the following editing on effect registers and master timeline
registers.
• Lock: Write-protect the contents of the register.
• Copy: Copy the contents of one register to another register.
• Merge: Merge the data of two registers. It is not possible to merge master
timeline registers.
• Move: Move the contents of one register to another register.
• Swap: Swap the contents of two registers.
• Delete: Delete the contents of a register.
• Name: Attach a name to a register.
Write-protecting the contents of the effect register
Use the following procedure.
Note
It is not possible to write-protect an empty register.
1
In the Effect menu, press VF2 'Effect' and HF2 'Lock.'
The Lock menu appears.
Parameter Adjustment
Duration Dissolve duration
Setting values
0 to 999 (frames)
Register Operations in the Menus
157