The status area shows a list of the items with their settings.
Screen saver settings
To enable the menu screen saver, use the following procedure.
1
2
Adjusting the brightness
You can adjust each of the following brightnesses independently.
LCD: Adjust the brightness of the source name displays and the LCD buttons
LED: Adjust the brightness of the LED displays in the numeric keypad control
Switch: Adjust the brightness of the panel switches.
The following description takes the LCD brightness as an example. Use a
similar process for the other adjustments.
1
2
Adjusting the alarms
In the Panel>Maintenance menu, make the following settings.
To give audible feedback from menu touch screen operations: Press
Calibrating the touch panel
Use the following procedure.
1
240
Setup Relating to Operations From the Control Panel
In the Panel>Maintenance menu, press [Screen Saver], turning it on.
Adjust the following parameter.
Knob
Parameter
Adjustment
1
Sleep Time
Time until screen saver starts
operation
in the Flexi Pad control block.
block and so forth.
In the Panel>Maintenance menu, press [LCD Brightness].
Adjust the following parameter.
Knob
Parameter
Adjustment
1
Brightness
Menu screen brightness
a) The larger the value, the brighter the screen.
[Touch Beep], turning it on.
In the Panel>Maintenance menu, press [Touch Panel Calibration].
Setting values
1 to 300 (minutes)
Setting values
a)
1 to 5