Sony MVS-8000 User Manual page 54

2
Blind settings
The Blind effect divides the image into bars or wedges, with blocks rotating
like the slats of venetian blinds.
To apply the Blind effect
With the Blind menu displayed, use the following procedure.
1
2
3
54
DME Special Effect Operations
To set the partition method, press [Partition] and set the following
parameters.
Knob Parameter Adjustment
1 Width Width of partition
2 Random Degree of randomness in partition
width
3 Angle Partition angle
In the <Mode> group, select [Bar] or [Wedge].
To make transition settings, press [Transition] and set the following
parameters.
Knob Parameter Adjustment
1 Rotation Number of rotations of the blocks
2 Perspective Degree of randomness in distance
moved by each block
To set the partition method, press [Partition] and set the following
parameters.
• When Bar was selected in step 2
Knob Parameter Adjustment
1 Width Width of partition
2 Offset Degree of randomness in partition
width
3 Angle Starting angle of effect
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
• When Wedge was selected in step 2
Knob Parameter Adjustment
4 No Width of blocks
Setting values
0.000 to 100.000
0.000 to 100.000
−8.000 to +8.000
Setting values
−8.000 to +8.000
0.000 to 100.000
Setting values
0.000 to 100.000
−5.000 to +5.000
a)
−20.000 to 20.000 b)
−8.000 to +8.000
Setting values
0.000 to 100.000