Sony MVS-8000 User Manual page 329

Background B row
Background A row
The cross-point button you pressed flashes amber, and the register you
recalled in step 1 is assigned to the button.
If you make both pre macro and post macro settings for the same
button
The later setting is valid.
To make a macro attachment setting in macro only mode
Note
To carry out this operation, it is first necessary to assign the "Macro Only Set"
function to one of the user preference buttons in the menu control block. Carry
out this assignment in the Eng Setup>Panel>Prefs/Utility menu. (For details,
see "Setting Button Assignments (Prefs/Utility Menu)" (page 225).)
To make a macro attachment in Macro Only mode, use the following
procedure.
1
Recall the macro register you want to assign to the button.
For details of recall from the numeric keypad control block, see page 317.
For details of recall from the Flexi Pad control block, see page 323.
PRE MCRO button
M/E M/E M/E XPT
SHIFT
1 2 3 HOLD
M/E M/E M/E XPT
SHIFT
1 2 3 HOLD
PRE
SHIFT
MCRO
M/E M/E M/E
XPT
SHIFT
1 2 3 HOLD
M/E M/E M/E
XPT
SHIFT
1 2 3 HOLD
MCRO ATTCH ENBL button
Macro Attachment Assigning
POST MCRO button
KEY3
KEY4
POST
MCRO
MCRO
ATTCH
ENBL
UTIL
329