Signal Input Settings (Input Menu) - Sony MVS-8000 User Manual

2

Signal Input Settings (Input Menu)

For setup relating to signal inputs, use the Switcher>Input menu.
To display the Input menu
In the Engineering Setup menu, select VF3 'Switcher' and HF2 'Input.'
The status area shows source numbers and source names, input signal phase,
and through mode on/off setting.
Making phase adjustment and through mode settings
Use the following procedure.
1
2
3
246
Setup Relating to Switcher Processor
Select the M/E you want to logically set to the PGM/PST from the
<Logical M/E to Physical P/P> group.
P/P: assign the physical PGM/PST as logical PGM/PST.
M/E-1: assign the physical PGM/PST as logical M/E-1.
M/E-2: assign the physical PGM/PST as logical M/E-2.
M/E-3: assign the physical PGM/PST as logical M/E-3.
In the Switcher>Input menu, select the input signal to which the settings
apply.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the setting.
Knob Parameter Adjustment
1 Src No Input signal selection
The selected input signal appears in reverse video.
Press [Input Phase Adj].
To adjust the phase, adjust the following parameter.
Knob Parameter Adjustment
2 Phase Input signal phase
Setting values
1 to 80
Setting values
−16 to +16