Sony MVS-8000 User Manual page 41

Name
Multi Mirror
Kaleidoscope Creates an image like a view into a kaleidoscope.
Lens
Circle
Panorama
Page Turn
Roll
Cylinder
Sphere
Explosion
Swirl
Melt
Character
Trail
Note
It is not possible to apply two or more nonlinear effects at the same time.
Turning any nonlinear effect on automatically turns all other nonlinear
effects off.
To turn an effect off
In the setting menu, press the button for the effect name, turning it off, or in the
Type menu press [OFF] in the lower right part of the window.
Wave settings
The Wave effect produces a wave-like effect in the image.
To apply the Wave effect
With the Wave menu displayed, use the following procedure.
1
In the <Mode> group, select the wave modulation mode.
H&V: Modulate vertically and horizontally without changing the size of
the image. This mode allows waves to be created in both the vertical
and horizontal directions at the same time.
SIZE: Create waves by reducing and expanding the image. This mode
allows waves to be created in one direction only.
Effect
Divides the image into originals and reflections, lining
them up vertically and horizontally.
Creates an image like a view through a lens.
Makes a circle with the image.
Curves the upper and lower edges of the image to
emphasize the sense of perspective.
Turns the image like a turning page.
Rolls the image up.
Winds the whole image onto a cylinder.
Winds the whole image onto a sphere.
Divides the image into fragments which expand as they
fly out.
Swirls the image.
Melts the image away from a specified part.
Extends the edge of the image like a trail.
See
page 58
page 59
page 60
page 61
page 61
page 62
page 63
page 63
page 64
page 64
page 65
page 66
page 68
DME Special Effect Operations
41