5
To soften the inside of the edges and the boundaries between adjacent
edges, turn on [Edge Soft], and adjust the following parameters.
Knob
1
2
Defocus Settings
This effect defocuses the entire image.
For an illustrative figure and other information, see "DME Special Effects" in
Chapter 1 (Volume 1).
Applying the Defocus effect
Use the following procedure.
1
In the DME menu, select VF2 'Video Modify' and HF1 'Defocus/Blur.'
The Defocus/Blur menu appears.
2
Press [Defocus], turning it on.
The Defocus effect is enabled. You can adjust the defocusing of video and
key signals with the knobs.
3
In the <Defocus> group, select the signal to which to apply the defocus
effect.
Video/Key: Video signal and key signal
Video: Video signal only
Parameter
Adjustment
Inner Soft
Softness of the inside of edges
Bound Soft
Softness of the edge boundaries
Bound Soft
Setting values
0.00 to 100.00
0.00 to 100.00
Inner Soft
DME Special Effect Operations
31