Sony MVS-8000 User Manual page 258

6
7
8
To delete a link
Select the link you want to delete, then press [Clear] in the Internal Bus Link
menu.
Making link table settings
Use the following procedure.
1
2
258
Setup Relating to Switcher Processor
Only when [Master Bus] is selected, 115 (M/E-1 Trans PGM), 116 (M/
a)
E-2 Trans PGM), 117 (M/E-3 Trans PGM), and 118 (P/P Trans PGM)
are available. When [Linked Bus] is selected, 115 to 118 are not
available.
Note
With one of 115 to 118 selected for [Master Bus], linking is carried out
as soon as you start moving the fader lever.
In the <Bus Select> group, select [Linked Bus] (link destination bus).
Referring to step 5, select the bus to be the link destination, and press [Bus
Set].
Turn the knob to select the link table, and press [Link Table Set].
Knob Parameter
3 Link Table No
For more information about link tables, see the following item.
The status area reflects the current setting status.
In the Internal Bus Link menu, press [Link Table Select].
The Link Table Select menu appears.
Using any of the following methods, select the link source and link
destination signals.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs to make the setting.
Knob Parameter Adjustment
4 Main No
Video/key signal for link source
5 No
Video/key signal for link destination
a) When the selected bus has a key source bus set, a key signal is displayed; when other buses
are selected, a video signal is displayed.
Adjustment
Link table selection
Setting values
1 to 8
Setting values
a) 1 to 128
1 to 128
a)