Sony MVS-8000 User Manual page 280

5
6
7
To delete the serial port assignment
Use the following procedure.
1
2
3
Making detailed settings on the external device connected to the
serial port
After setting the external device for each serial port, it is necessary to make
further detailed settings for operation of the external device.
To make detailed settings for a VTR
Use the following procedure.
1
280
Setup Relating to DCU
To enter the name of the serial port, press [Set] in the <Name> group.
A keyboard window appears. You can enter a name of not more than 16
characters.
If no name is set for the serial port, it is displayed as "DCUd_PORTs-p."
d: 1 or 2 (DCU No.)
s: 1 to 5 (Slot No.)
p: 1 to 6 (Port No.)
Press [Enter].
To return the set name to the default name
Press [Clear] in the <Name> group.
From the <SCU Select> group, select the control panel (SCU1, SCU2 or
SCU3) assigned to operations on the external device connected to the
serial port.
In the DCU>Serial Port Assign menu, select the target for the setting
(DCU1 or DCU2) from the <DCU Select> group.
Using any of the following methods, specify the serial port.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the selection.
Knob Parameter Adjustment
1 Port No Serial port
a) The setting value range depends on the DCU port setting.
Press [Clear].
In the DCU>Serial Port Assign menu, select the target for the setting
(DCU1 or DCU2) from the <DCU Select> group.
Setting values
a)
1 to max.