Sony MVS-8000 User Manual page 55

Knob
5
To set the wedge center position
When Wedge is selected in the <Mode> group, you can set the wedge center
position.
1
Press [Position].
2
Set the following parameters.
Knob
1
2
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
Split settings
The Split effect splits the image upper and lower, left and right.
To apply the Split effect
With the Split menu displayed, use the following procedure.
1
In the <Mode> group, select the split method.
Single: Leave gaps between splits.
Double: Fill gaps between splits with the same image.
2
Set the following parameters.
Knob
1
2
To set the split position
Use the following procedure.
1
Press [Position].
Parameter Adjustment
Phase Partition position
Parameter Adjustment
H Horizontal center position
V Vertical center position
Parameter Adjustment
Transition H Degree of left and right separation
Transition V Degree of top and bottom
separation
Setting values
−8.000 to +8.000
Setting values
−8.000 to +8.000
a)
−32.000 to +32.000
−6.000 to +6.000 a)
−18.000 to +18.000
Setting values
0.000 to 100.000
0.000 to 100.000
DME Special Effect Operations
b)
b)
55