Sony MVS-8000 User Manual page 325

Example:
7
4
1
0
4
In the same way as in the numeric keypad control block, create the events
you want to save in the macro.
For details, see step 2 (page 318) of "Creating a new macro."
5
Repeat step 4 to save the desired events in the macro.
The operations you carry out on the control panel are saved as a sequence
of events in the macro.
The numeric display appears as follows.
Example:
6
Press the [STORE XX] button in the memory recall section (where XX is
the register number).
The [STORE STATS] button lights amber.
This saves the created macro in the register, and macro editing ends.
The Flexi Pad control block returns to the state before macro editing began.
The [MCRO] button lights amber.
Notes
• During macro editing, you can press a mode selection button in the Flexi
Pad control block other than the [MCRO] button (for example, the
[WIPE] button or [DME] button) to record the executed operation as an
event. In this case, the [MCRO] button remains lit red.
• During macro editing, if you press a button for which a macro
attachment is set, the macro within the register assigned to the button is
8 9
Press to set a pause length.
5 6
"12" is the number of the currently
recalled register. Pressing this button
saves the macro, and the Flexi Pad
2 3
section switches back from macro
editing mode to the recall operation
STOR mode.
PAUS
/12
Total number of events
Position of last saved event
Macro Operations in the Flexi Pad Control Block
325