Sony MVS-8000 User Manual page 159

4
Using any of the following methods, select the desired registers.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Use the knobs.
Knob
1
2
3
• To select all registers, press [All].
5
To copy without transferring the name, in the <Copy> group, press [W/o
Name], turning it on.
6
In the <Copy> group, press [Copy].
This carries out the copy.
If, for example, the copy destination register is write-protected or the same
register is specified both as the copy source and destination registers, a
confirmation message appears. Press [OK] to cancel the copy.
Merging effect registers
Carry out the following procedure.
1
In the Effect menu, select VF2 'Effect' and HF3 'Copy/Merge.'
• The Copy/Merge menu appears.
• The left side of the status area shows a list for the register coming
afterward when merged. The right side shows a list for the register
coming before when merged.
2
Press the region display in the upper part of the list, and in the selection
window select the region. Selecting multiple regions is also possible.
3
Press [OK].
The selected region name appears in the upper part of the list.
4
Using any of the following methods, select the register.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
Parameter Adjustment
From Reg Copy source register number
To Reg Copy destination register number 1 to 99
Num Select number of registers
Setting values
1 to 99
1 to 99
Register Operations in the Menus
159