Global Effect Operations; Combiner Settings - Sony MVS-8000 User Manual

Global Effect Operations

Global effects are special effects created by combining the images of
successive channels. The following types of global effects are available.
• Combiner
• Brick
• Shadow
For details of these global effects, see "Global Effects" in Chapter 1 (Volume
1).
Operations common to all global effects
In this section, explanations of the operating procedures for individual global
effects begin with selections from VF1 'Ch1' - 'Ch4' in the Global Effect
menu. The following are common operations that you must do prior to
selecting from this menu.
1
2

Combiner Settings

By using combiners, you can freely combine up to three continuous channels
from among four channels.
You can also combine channels 1 and 2, and channels 3 and 4, pairwise.
The setting menu differs according to the combiner usage status.
This section shows the cases of "Ch1+Ch2+Ch3" and "Ch1+Ch2, Ch3+Ch4"
as examples.
Setting the combiners
Use the following procedure.
1
82
Global Effect Operations
In the device control block, select the target DME channel.
In the menu control block, press the top menu selection button [GLB EFF],
then select VF1 'Ch1' - 'Ch4.'
The Global Effect>Ch1 - Ch4 menu appears.
In the Global Effect>Ch1- Ch4 menu, select HF1 'Combiner.'
The Combiner menu appears.