Setup Relating To Dme; Settings Relating To Signal Inputs (Input Menu) - Sony MVS-8000 User Manual

Setup Relating to DME

Settings Relating to Signal Inputs (Input Menu)

To make settings relating to DME input signals, display the DME>Input menu.
To display the Input menu
In the Engineering Setup menu, select VF4 'DME' and HF1 'Input.'
The status area shows the initial crop information.
In the following description, the settings for DME1 are given by way of
example, but the settings for DME2 are carried out in a similar way.
Setting the initial crop
Use the following procedure.
1
In the DME1 <Aspect> group, select the screen aspect ratio (16:9 or 4:3).
2
In the DME1 <Crop> group, press [Initial Crop] and adjust the following
parameters.
If you selected 4:3 in step 2
Knob
1
2
3
4
If you selected 16:9 in step 2
Knob
1
2
3
4
To return the parameter values to their default values
Press [Unity] in the <Crop> group.
Parameter Adjustment
Top Position of top side
Left Position of left side
Right Position of right side
Bottom Position of bottom side
Parameter Adjustment
Top Position of top side
Left Position of left side
Right Position of right side
Bottom Position of bottom side
Setting values
–3.00 to +3.00
–4.00 to +4.00
–4.00 to +4.00
–3.00 to +3.00
Setting values
–9.00 to +9.00
–16.00 to
+16.00
–16.00 to
+16.00
–9.00 to +9.00
267

Setup Relating to DME