Creating And Editing Keyframes; Creation - Sony MVS-8000 User Manual

Creating and Editing Keyframes

For details of keyframe editing, see "Effect Editing" in Chapter 1 (Volume 1).

Creation

Creating new keyframes
To create new keyframes, after recalling an empty register, use the following
procedure to create and insert each new keyframe. Use the keyframe control
block for carrying out the operation.
1
2
3
4
5
Repeat steps 4 and 5 to create the required number of keyframes.
To insert a new keyframe before an existing keyframe
Hold down the [SHIFT] button and press the [INS] button, to insert a new
keyframe before the current keyframe.
126

Creating and Editing Keyframes

Press the [EDIT ENBL] button, turning it on.
This enables effect editing in the keyframe control block.
Create the image you want to be the first keyframe.
Press the [INS] button.
This takes the current image as the first keyframe.
You can make a setting in the Setup menu so that when you recall an empty
register, the system state at that point is automatically captured as the first
keyframe.
Create the image you want to be the next keyframe.
Press the [INS] button.
This inserts the current image as the second keyframe after the first
keyframe.