For details, see "Mask Settings" (page 59).
Mosaic Settings
This effect divides the image into small tiles so that it looks like a mosaic.
For an illustrative figure and other information, see "DME Special Effects" in
Chapter 1 (Volume 1).
Applying the Mosaic effect
Use the following procedure.
1
2
3
Masking the Mosaic effect with a selected pattern
Press [Mask] to display the Mask menu, and set the pattern type and modifiers.
For details, see "Mask Settings" (page 59).
Sketch Settings
This effect provides a range of effects based on the outline of the image, giving
impressions of sketching, enhanced outlines, drawing, relief, or increased
sharpness.
52
DME Special Effect Operations
In the DME menu, select VF2 'Video Modify' and HF4 'Mosaic.'
The Mosaic menu appears.
Press [Mosaic], turning it on.
The Mosaic effect is enabled. You can adjust the size and aspect ratio of
the mosaic tiles with the knobs.
Set the following parameters.
Knob
Parameter
1
Size
2
Aspect
a) Specify minus values to stretch the tiles in the vertical direction, and plus values to stretch
the tiles in the horizontal direction.
Adjustment
Size of tiles
Aspect ratio of tiles
Setting values
0.00 to 100.00
a)
–100.00 to +100.00