Sony MVS-8000 User Manual page 226

3
4
To cancel an assignment
After selecting the relevant button, press [Clear].
Assigning a menu shortcut to a user preference button
Use the following procedure.
1
2
226
Setup Relating to Operations From the Control Panel
Depending on the selection in step 2, make the following settings.
When Menu Shortcut is selected: For the subsequent operations, see the
next item "Assigning a menu shortcut to a user preference button"
(page 226).
When Utility Command is selected: A list of commands appears on the
right of the status area; using any of the following methods, select the
command you want to assign.
• Press directly on the list.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob to make the selection.
Knob Parameter Adjustment
3 Command Utility command selection
When Shotbox Recall is selected: Turn the knob to select the shotbox
register you want to assign.
Knob Parameter Adjustment
3 Shotbox Shotbox register selection
Press [Action Set].
This assigns the selected action, which is reflected in the status area.
Referring to the procedure up to step 2 in the previous item, select [Menu
Shortcut].
The user preference buttons [PREFS 1] to [PREFS 8] flash amber.
Using any of the following methods, display the menu to which you want
to make a shortcut.
• In the menu control block, press the relevant top menu selection button,
then select VF and HF.
• Press the menu page number button in the upper left corner of the menu
screen, then enter a menu number from the numeric keypad window.
• Press a particular control panel button twice in rapid succession.
Setting values
1 ...
Setting values
1 to 99