Saving A Macro - Sony MVS-8000 User Manual

4
5
6
7
Inserting a pause event
Use the following procedure.
1
2
3

Saving a Macro

To save a macro you have created or edited, use the following procedure.
1
2
3
320
Macro Operations in the Numeric Keypad Control Block
Repeat step 3 to add the desired events to the macro.
In the numeric keypad control block, press the [MCRO] button, turning it
red.
Press the [STORE] button.
This completes macro editing, and the [MCRO] and [STORE] buttons in
the numeric keypad control block light amber. The keyframe control block
returns to the state before macro editing began.
Save the macro in the numeric keypad control block.
For details of the method of operation, see "Saving a Macro" (page 320).
In the keyframe control block, press the [PAUSE] button, lighting it green.
The numeric keypad control block display shows "PAUSE."
With the buttons in the numeric keypad control block, enter the length of
the pause (1 to 999 frames).
Press the [ENTER] button.
This sets the pause length, and inserts the pause event.
In the numeric keypad control block, press the [MCRO] button, turning it
on.
This assigns the numeric keypad control block to macro operations.
Press the [STORE] button, turning it on.
Enter the number of the register in which you want to save the macro with
the numeric keypad buttons.
To search for an empty register, instead of entering a number, press the [.]
(period) button.