Multi Move Settings - Sony MVS-8000 User Manual

3
Set the parameters.
Knob
1
2
3

Multi Move Settings

This effect shrinks the image and lines up a number of copies vertically and
horizontally.
For an illustrative figure and other information, see "DME Special Effects" in
Chapter 1 (Volume 1).
Applying the Multi Move effect
Use the following procedure.
1
In the DME menu, select VF2 'Video Modify' and HF2 'Multi Move.'
The Multi Move menu appears.
2
Press [Multi Move], turning it on.
The Multi Move effect is enabled. You can adjust the center point of
shrinking, the ratio of shrinking, and the aspect ratio of the shrunken
images with the knobs.
3
Set the parameters.
Parameter limits vary as shown below, depending on the signal format (SD
or HD) and aspect ratio (4:3 or 16:9) selected in the system.
• SD format, 4:3 mode
Knob
1
2
Parameter Adjustment
H Horizontal defocusing of video
and key signals
V Vertical defocusing of video and
key signals
All Horizontal and vertical
defocusing of video and key
signals
Parameter Adjustment
Center X x-value of shrinking center point
Center Y y-value of shrinking center point
Setting values
0.00 to 100.00
0.00 to 100.00
H value shown
Setting values
−
4.00 to +4.00
−
3.00 to +3.00
DME Special Effect Operations
33