When an effect dissolve is set:
Displayed
character codes
Duration value
When an auto transition is set:
Displayed
character codes
T
When a GPI output is set:
Displayed
character codes
Port number
Setting Key Snapshot Attributes
Applying key snapshot attributes
To apply an attribute to a key snapshot, use the following procedure.
1
In the Snapshot menu, press VF5 'Key Snapshot' and HF1 'Attribute.'
The Snapshot>Key Snapshot>Attribute menu appears.
The status area shows the region names, register numbers, and whether the
registers are locked or not.
2
Press the region display in the upper part of the list to display a selection
window, then select the region in the selection window. Selecting multiple
regions is also possible.
3
Press [OK].
The selected region name appears in the upper part of the list.
4
Using either of the following methods, select the register.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
Attributes set
The effect dissolve attribute is set, with the displayed duration.
Attributes set
Auto transition is set.
Attributes set
GPI output is set for the port of the displayed number.
Snapshot Operations in the Menus
179