Knob
1
3
• To select all registers, press [ALL].
5
Press [Effect Dissolve], turning it on.
6
Turn the knob to set the duration.
Knob
4
Setting the duration for a temporary attribute
To set the duration for a temporary attribute set in the numeric keypad control
block, turn knob 5.
Knob
5
Effect Status Display
The Effect >Effect 1-99 menu displays the following information.
Region name: The selected region name appears in the upper part of the list.
Register number
Register name
Write-protected status: When the register is write-protected, a letter "L"
appears.
Empty status: When the register is empty, a letter "E" appears.
Effect Register Editing
You can carry out the following editing on effect registers and master timeline
registers.
• Lock: Write-protect the contents of the register.
• Copy: Copy the contents of one register to another register.
• Merge: Merge the data of two registers. It is not possible to merge master
timeline registers.
Parameter
Adjustment
Register
Register number
Num
Select number of registers
Parameter
Adjustment
Eff Diss
Dissolve duration
Duration
Parameter
Adjustment
Temp Dur
Temporary attribute
dissolve duration
Setting values
1 to 99
1 to 99
Setting values
1 to 999 (frames)
Setting values
0 to 999 (frames)
Register Operations in the Menus
677