NEC 78K0S/KB1+ User Manual page 117

Figure 6-34. Control Register Settings for One-Shot Pulse Output with External Trigger
ES110 ES100
PRM00 0/1 0/1
7 6
CRC00
0 0
7
OSPT00 OSPE00
TOC00 0 0
7 6
TMC00
0 0
Caution Do not set 0000H to the CR000 and CR010 registers.
CHAPTER 6 16-BIT TIMER/EVENT COUNTER 00
(with Rising Edge Specified)
(a) Prescaler mode register 00 (PRM00)
ES010 ES000 3
0 1 0
(b) Capture/compare control register 00 (CRC00)
5 4 3
0 0 0
(c) 16-bit timer output control register 00 (TOC00)
TOC004 LVS00 LVR00
1 1 0/1
(d) 16-bit timer mode control register 00 (TMC00)
5 4
TMC003
0 0 1
User's Manual U17446EJ3V1UD
2 PRM001 PRM000
0 0/1 0/1
CRC002 CRC001 CRC000
0 0/1 0
TOC001 TOE00
0/1 1 1
Enables TO00 output.
Inverts output upon match
between TM00 and CR000.
Specifies initial value of
TO00 output F/F (setting "11" is prohibited.)
Inverts output upon match
between TM00 and CR010.
Sets one-shot pulse output mode.
TMC002 TMC001 OVF00
0 0 0
Selects count clock
(setting "11" is prohibited).
Specifies the rising edge
for pulse width detection.
Setting invalid
(setting "10" is prohibited.)
CR000 used as compare register
CR010 used as compare register
Clears and starts at
valid edge of TI000 pin.
117