Examples Of Operation When Interrupt-Disabled Time Should Be Minimized In Self Programming Mode - NEC 78K0S/KB1+ User Manual
8-bit single-chip microcontrollers
Hide thumbs
Also See for 78K0S/KB1+:
- Application note (49 pages) ,
- Application note (38 pages) ,
- Application note (37 pages)
Table of Contents
Advertisement
19.8.11 Examples of operation when interrupt-disabled time should be minimized in self programming mode
Examples of operation when the interrupt-disabled time should be minimized in self programming mode are
explained below.
(1) Erasure to blank check
<1> Specification of block erase command (<1> to <5> in 19.8.6)
<2> Mode is shifted from normal mode to self programming mode (<1> to <7> in 19.8.4)
<3> Execution of block erase command → Error check (<6> to <11> in 19.8.6)
<4> Mode is shifted from self programming mode to normal mode (<1> to <6> in 19.8.5)
<5> Specification of block blank check command (<1> to <5> in 19.8.7)
<6> Mode is shifted from normal mode to self programming mode (<1> to <7> in 19.8.4)
<7> Execution of block blank check command → Error check (<6> to <11> in 19.8.7)
<8> Mode is shifted from self programming mode to normal mode (<1> to <6> in 19.8.5)
CHAPTER 19 FLASH MEMORY
User's Manual U17446EJ3V1UD
317
Advertisement
Table of Contents
