Backup & Restore; Backup (Start Backup); Recovery (Search For Restore File) - Fronius TPS 320i Operating Instructions Manual

Backup & Restore
Backup & Restore In the Backup & Restore entry,
-
-
Backup (start
1
backup)
Recovery (search
1
for restore file)
2
3
150
all the welding system data can be saved as a backup (e.g. current parameter settings,
jobs, user characteristics, defaults, etc.).
existing backups can be re-saved in the welding system.
Click on "Start backup" to save a backup of the welding system data
The data is saved in a selected location in the default format MCU1-YYYYMMDDH-
Hmm.fbc.
YYYY = Year
MM = Month
DD = Day
HH = Hour
mm = Minute
The date and time correspond to the power source settings.
Click on "Search restore file" to transfer an available backup to the power source
Click on "Open"
The selected backup file is displayed on the power source website under "Restore".
Click on "Start recovery"
Once the data has been successfully restored, a confirmation to this effect is dis-
played.