Safety Measures In Normal Operation; Commissioning, Maintenance, And Repair; Safety Symbols; Data Backup - Fronius Welducation Simulator Operating Instructions Manual

Use instructions and checks within the company to ensure that the vicinity of the
workplace is always clean and organized.
After transport and before installation and commissioning, it is essential to visu-
ally inspect the device for damage. Have trained and qualified personnel repair
any damage before installation and commissioning.
Safety measures Only operate the device when all safety devices are fully functional. If the safety
in normal opera- devices are not fully functional, there is a danger of:
tion -
-
-
Safety devices that are not fully functional must be repaired before the device is
switched on.
Never bypass or disable safety devices.
Ensure the safety of all persons before switching on the device.
The device must be examined at least once a week for externally detectable dam-
age and functionality of the safety devices.
Commissioning, It is impossible to guarantee that third-party parts are designed and manufac-
maintenance, tured to meet the demands made on them, and that they satisfy safety require-
and repair ments.
-
-
-
-
The housing screws provide the ground conductor connection for grounding the
housing parts.
Always use original housing screws in the appropriate quantity with the specified
torque.

Safety symbols

Devices with the CE label satisfy the essential requirements of the low-voltage
and electromagnetic compatibility directive (e.g., relevant product standards of
the EN 60 974 series).
Fronius International GmbH declares that the device complies with Directive
2014/53/EU. The full text of the EU Declaration of Conformity is available on the
following website: http://www.fronius.com
Devices marked with the CSA test mark satisfy the requirements of the relevant
standards for Canada and the USA.

Data backup

The user is responsible for backing up any changes made to the factory settings.
The manufacturer accepts no liability for any deleted personal settings.
Serious or fatal injury to the operator or third parties
Damage to the device and other material assets belonging to the operating
company
Inefficient operation of the device
Use only original spare and wear parts (also applies to standard parts).
Do not carry out any alterations, installations, or modifications to the device
without first obtaining the manufacturer's permission.
Components that are not in perfect condition must be changed immediately.
When ordering, specify the exact name and part number according to the
Spare Parts List, as well as the serial number of your device.
11