Documentation: Setting The Sampling Rate - Fronius TPS 320i Operating Instructions Manual

The text is confirmed and the power source configuration is displayed.
8
Documentation:
Setting the sam-
pling rate
1
2
3
The basic settings documentation is displayed.
4
5
6
The basic settings documentation is displayed.
138
Select "Store" to apply changes
1
Select "Defaults"
Select "Documentation"
Select "Basic settings"
Press the adjusting dial
Turn the adjusting dial and change the sampling rate value:
off
Sampling rate is deactivated; only average values are stored.
0.1–100.0 s
Documentation is stored with the set sampling rate.
Select "OK" to confirm the sampling rate
3
2