Correct Arrangement Of The Interconnecting Hosepack - Fronius TPS 320i Operating Instructions Manual

Correct arrange-
ment of the inter-
connecting
hosepack

Correct arrangement of the interconnecting hosepack

IMPORTANT:
-
-
-
60
CAUTION! Risk of damage to components due to overheating posed by laying
the interconnecting hosepack incorrectly.
- Lay the interconnecting hosepack without loops
- Do not put anything on top of the interconnecting hosepack
- Do not wind up the interconnecting hosepack next to gas cylinders and do
not wind it around gas cylinders
The duty cycle value (D.C.) for the interconnecting hosepack can only be attained
when the interconnecting hosepacks are laid correctly.
Carry out R/L calibration if the arrangement of an interconnecting hosepack changes
(see page 105).
Magnetically compensated interconnecting hosepacks make it possible to change the
arrangement without affecting the welding circuit inductivity.
Magnetically compensated interconnecting hosepacks are available from Fronius with
a minimum length of 10 m.