Displaying Characteristics - Fronius TPS 320i Operating Instructions Manual

4
The default display settings are displayed.
Displaying char-
acteristics
1
Current motor current in A, wirefeeder 1
(wirefeeder next to the arc)
Current motor current in A, wirefeeder 2
(e.g. the rear wirefeeder in a push-pull system)
Current motor current in A, wirefeeder 3
(e.g. an unreeling wirefeeder in a push-pull system with unreeling wire-
feeder)
Current flow rate in l/min on the cooling unit
(with built-in OPT/i CU flow temperature sensor option)
Error output if flow rate < 0.7 l/min
Current coolant temperature in °C on the cooling unit
(with built-in OPT/i CU flow temperature sensor option)
Error output if coolant temperature > 70 °C
(measured during coolant return)
Current shielding gas flow rate
(with OPT/i gas controller option present)
Arc time in h
Total power source operating hours in h
Select "OK" to exit the system data
1
Select "Defaults"
2
3
131